Latest ci pipe sale Tenders | Government ci pipe sale Tenders

State Government

CTN :43330527

16 Jan, 2026 22.81 Lacs

Srikakulam - Andhra Pradesh

Tender For replacing the damaged doors and windows of the control room, providing of required pvc rain water pipes, reconstruction of damaged dummy pillars on terrace, construction of damaged portion of the compound wall and a drainage sump near the old control room, providing of spiral staircase to terrace floor, sunshades and a water storage tank, casting of new cover slabs over the cableducts, providing of grills to the windows, repairs to the existing gents toilet, providing of vitrified tiles at damaged portion to the first floor of the control house and other miscellaneous works at 220kv ss tekkali in srikakulam district (2nd call)

State Government

CTN :43312085

26 Dec, 2025 NA

Karnal - Haryana

Tender For quotation for copper wire, cpvc pipes, water tanks, ci valves, extension board, holder, led light, street light, ball cock, m s saddle piece, l.e.d bulb, cpvc coupler

State Government

CTN :43300250

29 Dec, 2025 1.76 Lacs

Chennai - Tamil Nadu

Tender For replacement of old damaged ci pipes rain water and sewage lines, sanitary and bath fittings with new upvc pipes, sanitary and bath fittings in rooms of andaman and nicobar bhawan anna nagar, chennai under sub-division no-ii store division.

corporations/Associations/Others

CTN :43261557

26 Dec, 2025 7.15 Lacs

Coimbatore - Tamil Nadu

Tender For tiruppur corporation_z1_gf_maintenance and special repair work and providing and fixing of equipments tools and plants to the micro compost centre at athupalayam in ward no 10 - supply and fixing of sanitary napkin destroyer machine machine with storage capacity of 100 napkins per day with dimension of 220mm x 220mm x 360mm of wall mounting style no 1 pcs etc., complete., supply and fixing of pest controller of 64w with 360 inser killer etc., complete., dismantling the existing plain cement concrete including removing the debris from the site and stacking useful material at work site for reuse etc., complete complying with standard specification., earthwork excavation for foundation in all soils and sub soils except in hard rock requiring blasting and depositing on bank with initial lead of 10m and initial lift of 2m inclusive of shoring, shuttering, bailing out water wherever necessary, refilling the foundation with excavated earth other than sandy soil in layers of not more than 150mm thick layers well rammed and depositing the surplus earth within the compound in place shown by the departmental officers and clearing and levelling the site etc,. complete., plain cement concrete 1:4:8 [one cement, four m-sand and eight course aggregates] using 40mm size hard broken/machine crushed granite stone jelly including dewatering if found necessary and laid in layers of not more than 15cm thick and compacted etc., complete complying with standard specification., supply and delivery fixing of pvc chamber 2way 90 with cover size of 315mm x 110mm with chamber riser size of 315mm x 200mm including transporting etc.,, chambers, riser, plastering with cement mortar 1:4 mix (one cement four p-sand), 20mm thick in all floors using clean screened m-sand and including cost of curing for fifteen days from the completion of the work and surface should free from undulations and including the cost of preparing the surface for plastering and protecting from other damages till setting of mortar etc., complete complying with standard specification., plastering with cement mortar 1:5 mix (one cement five p-sand), 12mm thick in all floors using clean screened m-sand and including cost of curing for fifteen days from the completion of the work and surface should free from undulations and including the cost of preparing the surface for plastering and protecting from other damages till setting of mortar etc., complete complying with standard specification., painting two coats with ready mixed plastic emulsion paint (weather proof) of approved quality and colour over a priming coat, including thorough scraping, clean removal of dirt and including necessary plaster of paris, putty wherever required etc., complete as per standard specifications., wring with 2 x1.5 sqmm (22/0.3) pvc insulated sc unsheathed cu conductor of 1100v grade in suitable pvc rigid pipe concealed in wall and ceiling with pvc accessories in flush with wall with 3mm thick hylum sheet cover with tw switch box and 5a f.t switch with continous earth wire connection of 14 swg tc wire for making good of the concealed portion with suitable color of pvc concealed light point / fan point (for electronic regulator ), supply and fixing of 200w 4 feet led fitting as per standard specificatin., supply and fixing of 1200mm (48") sweep ac ceiling fan complete with stepped electronic 300w regulator with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18")., supply and fixing of wall mounting 450mm sweep fan etc.,, supply and fixing of roof ventilator fan etc.,, replacement of underground utilities hdpe pipe damaged during earthwork excavations for pipe laying works including cost of additional earthwork excavation in all soils, including bt cutting, cc roads , removal of slushy soil and replacing the pipeline with sound pipe, including supply and delivery of hdpe pipes, couplers, jointing materials and required specials, cutting, threading, conveying , laying, jointing and

corporations/Associations/Others

CTN :43265878

26 Dec, 2025 7.20 Lacs

Coimbatore - Tamil Nadu

Tender For tiruppur corporation_z4_gf_maintenance and special repaire work and providing and fixing of equipments tools and plants to the micro compost centre at shanthapettai ii in ward no 52 - supply and fixing of sanitary napkin destroyer machine machine with storage capacity of 100 napkins per day with dimension of 220mm x 220mm x 360mm of wall mounting style no 1 pcs etc.,, supply and fixing of plastic crates of dimension 460mm * 520 mm with isi standard etc.,, supply and fixing of plastic barrels of measuring 800 litres with lid for storing of enzymes with isi standard etc.,, supply and fixing of plastic dustbin of measuring 250 litres for storing dry waste on segregation etc.,, supply and fixing of pest controller of 64w with 360 inser killer etc., complete as per lowest quotation., providing safety gloves and apron for the workers with isi standards etc.,, supply and installation of viberator separator capacity of 1 ton/hr with power 2hp motorand measuring of size 3*6 feet and the installation to the required place as per instruction of departmental officers etc complete., supply of powing tools and segegrator for the ground work of mcc compost tank with isi standard and proper measuring length according to the requirement., supply of industrial making trolly as per standard sixw using of lead purpose etc.,, plain cement concrete 1:4:8 [one cement, four m-sand and eight course aggregates] using 40mm size hard broken/machine crushed granite stone jelly including dewatering if found necessary and laid in layers of not more than 15cm thick and compacted etc., complete complying with standard specification., supplying and fixing in position white glazed earthenware oriya type indian water closet of size 580mm x 440mm of approved quality with p (or) s trap confirming to is:2556 - part xii with sand cushion and forming flooring around the closet using 40mm broken brick jelly in lime concrete 1:2:5 mix (one lime, two m-sand and five brick jelly) 100m thick and finishing the top to the required slope and including giving necessary connection to the cast iron soil pipes / pvc pipes by dismantling the brick masonry, reinforced concrete roof / floor slab and making good the disturbed portion to original condition without any leakage etc., complete complying with standard specification., paving the floor with 8mm thick joint free rectified glazed ceramic flooring tiles of all colours in all floors over a base layer of cement mortar 1:3 [one cement and three m-sand] 20mm thick laid in-situ and pointed with the same coloured cement neatly, including polishing with electric polishers to a high degree so as to make it perfectly smooth and showing etc., complete complying with standard specification., plastering with cement mortar 1:5 mix (one cement five p-sand), 12mm thick in all floors using clean screened m-sand and including cost of curing for fifteen days from the completion of the work and surface should free from undulations and including the cost of preparing the surface for plastering and protecting from other damages till setting of mortar etc., complete complying with standard specification., painting two coats with approved cement paint over cement plastered wall surface, ceiling and other new surface including cleaning, preparing the surface and curing etc., complete as per standard specification., finishing the top of flooring with a layer of cement concrete 1:3 [one cement and three stone jelly] ellis pattern 20mm thick using 10mm thick and below gauge hbg stone (no sand to be added) and the surfaces rubbed smooth with current etc., complete complying with standard specification., wring with 2 x1.5 sqmm (22/0.3) pvc insulated sc unsheathed cu conductor of 1100v grade in suitable pvc rigid pipe concealed in wall and ceiling with pvc accessories in flush with wall with 3mm thick hylum sheet cover with tw switch box and 5a f.t switch with continous earth wire connection of 14 swg tc wire for making good of the concealed portion with

corporations/Associations/Others

CTN :43287647

05 Jan, 2026 NA

Tuticorin - Tamil Nadu

Tender For ttps operation circle mpm i unit i complete dismantling of mill 1f and reassembling the dismantled spares in mill 1b - draining of mill gearbox oil completely, cleaning the gearbox internals like worm shafts and worms wheel. after inspection filling the gearbox with new/old oil including devolution of old oil to stores etc, (department vehicle will be provided for drawl of oil at free of cost)., charges for dismantling the gear coupling bolts, gear coupling (worm shaft only), distance piece, unscrewing the worm shaft extension cover bolts and bearing housing cover bolts, removing the worm shaft extension cover, lowering to ground floor, releasing the worm shaft assembly from its position and assemblies providing back the overhauled worm shaft assembly in the gear box and fitting back the worm shaft extension cover, bolting and tightening the bolts to the required torque level and assembling back the gear coupling bolts, distance piece etc., charges for dismantling the worn out rubber element in the mill motor coupling, cleaning inspection and replacement of new rubber element and checking the tightness of coupling including cost of consumables etc.,, charges for dismantling the spool pieces, multiple port outlet bodies and transition pipes 4 nos. each after assembling the coal pipe inspection with center feed pipe structures., charges for removal of orifice 1 no. after dismantling the victaulic coupling., charges for removal of mill journal doors including lead, lift and transporting of materials fromstores and devolution of scraps from site to stores and cost of consumables such as welding electrodes, gas, cotton waste etc.,, charges for removal of journal with trunnion assembly in the mills including lead, lift and transporting of materials from mill repair bay to mill floor and back, devolution of scrap to stores and cost of consumables such as welding rod, cutting gas, cotton waste etc., charges for changing of bowl extension ring (6 nos) per mill including lead, lift and transporting of materials from stores to mill floor and back, charges for dismantling of lube oil cooler, from lube oil system, cleaning, flushing the cooler, oil pipe lines, water pipe lines, oil separator tank, checking of water lines, valves and nipples., charges for providing wedges between lower skirt and mill insulation cover plate firmly, removal of gearbox bottom cover flange bolts, lowering the thrust bearing and pump housing after supporting lower radial bearing housing. lowering the thrust bearings and reassembling of all the above parts, charges for lifting the vertical shaft along with worm gear and worm wheel from top of the gear box and place it in stand. dismantling the worm wheel hub lock nut and removal of worm wheel from the worm hub by steam/induction heating. inspection of upper redial bearing and renewal if necessary., charges for dismantling and removing worn out thrust bearing of mill vertical shaft by gas heating the racer, cleaning the bearing seating area in the vertical shaft., charges for removing the thrust bearing adopter (worn out) and assembling the new adopter by heating, charges for removal of seperator body along with classifier assembly. inner cone mill outlet plate and venturi dismantling the air inlet housing after segregating from hot air duct placing in appropriate place. dismantling the bowl with bowl hub and separating the bowl hub from bowl and in filling the same., charges for dismantling of upper skirt assembly, lower skirt assembly, mechanical face seal assembly, dust guard and blue matching of seal runner, renewal of seal( bronze), air seal, dismantling of mill bottom cover, upper bearing housing cover, oil seals etc.,, charges for dismantling the triangular liners, cutting the bulged mill bottom plate, applying refractory cement at the mill bottom plate 1 set by providing bolts and welding., charges for dismantling the radial bearing after removing the oil pump hub and oil pump bushing., charges for changin

corporations/Associations/Others

CTN :43287648

05 Jan, 2026 NA

Tuticorin - Tamil Nadu

Tender For ttps operation circle mpm i unit i complete dismantling of mill 2f and reassembling the dismantled spares in mill 1c - draining of mill gearbox oil completely, cleaning the gearbox internals like worm shafts and worms wheel. after inspection filling the gearbox with new/old oil including devolution of old oil to stores etc, (department vehicle will be provided for drawl of oil at free of cost)., charges for dismantling the gear coupling bolts, gear coupling (worm shaft only), distance piece, unscrewing the worm shaft extension cover bolts and bearing housing cover bolts, removing the worm shaft extension cover, lowering to ground floor, releasing the worm shaft assembly from its position and assemblies providing back the overhauled worm shaft assembly in the gear box and fitting back the worm shaft extension cover, bolting and tightening the bolts to the required torque level and assembling back the gear coupling bolts, distance piece etc., charges for dismantling the worn out rubber element in the mill motor coupling, cleaning inspection and replacement of new rubber element and checking the tightness of coupling including cost of consumables etc.,, charges for dismantling the spool pieces, multiple port outlet bodies and transition pipes 4 nos. each after assembling the coal pipe inspection with center feed pipe structures., charges for removal of orifice 1 no. after dismantling the victaulic coupling., charges for removal of mill journal doors including lead, lift and transporting of materials fromstores and devolution of scraps from site to stores and cost of consumables such as welding electrodes, gas, cotton waste etc.,, charges for removal of journal with trunnion assembly in the mills including lead, lift and transporting of materials from mill repair bay to mill floor and back, devolution of scrap to stores and cost of consumables such as welding rod, cutting gas, cotton waste etc., charges for changing of bowl extension ring (6 nos) per mill including lead, lift and transporting of materials from stores to mill floor and back, charges for dismantling of lube oil cooler, from lube oil system, cleaning, flushing the cooler, oil pipe lines, water pipe lines, oil separator tank, checking of water lines, valves and nipples., charges for providing wedges between lower skirt and mill insulation cover plate firmly, removal of gearbox bottom cover flange bolts, lowering the thrust bearing and pump housing after supporting lower radial bearing housing. lowering the thrust bearings and reassembling of all the above parts, charges for lifting the vertical shaft along with worm gear and worm wheel from top of the gear box and place it in stand. dismantling the worm wheel hub lock nut and removal of worm wheel from the worm hub by steam/induction heating. inspection of upper redial bearing and renewal if necessary., charges for dismantling and removing worn out thrust bearing of mill vertical shaft by gas heating the racer, cleaning the bearing seating area in the vertical shaft., charges for removing the thrust bearing adopter (worn out) and assembling the new adopter by heating, charges for removal of seperator body along with classifier assembly. inner cone mill outlet plate and venturi dismantling the air inlet housing after segregating from hot air duct placing in appropriate place. dismantling the bowl with bowl hub and separating the bowl hub from bowl and in filling the same., charges for dismantling of upper skirt assembly, lower skirt assembly, mechanical face seal assembly, dust guard and blue matching of seal runner, renewal of seal( bronze), air seal, dismantling of mill bottom cover, upper bearing housing cover, oil seals etc.,, charges for dismantling the triangular liners, cutting the bulged mill bottom plate, applying refractory cement at the mill bottom plate 1 set by providing bolts and welding., charges for dismantling the radial bearing after removing the oil pump hub and oil pump bushing., charges for changin

Central Government/Public Sector

CTN :43331211

08 Jan, 2026 1.72 Lacs

Dhanbad - Jharkhand

Tender For making fire-fighting arrangement with accessories and rep./fabrication of partition frame of 28 kl water storage tank, cleaning of from i of the and pipes and inner painting tank of ws-28 water sprinkler sl. no. 28205 at asbnc ocp sijua area.

Corporations And Associations And Others

CTN :43311216

05 Jan, 2026 NA

Delhi - Delhi

Tender For supply of sanitary items for day to day maintenance by providing sanitary items at ward no.220 nand nagri shah.n.zone - polyethylene water storage tank with cover and suitable locking arrangemnet, supplying of 15 mm nominal bore and 45 cm length pvc connection pipe with ptmt nuts, vitreous china flat back wash basin 630x450 mm, semi rigid pvc waste pipe for sink and wash basin 40 mn dia with length not less than 700 mm i/c pvc waste fittings, vitreous china india type w.c. pan size 580 mm, vitreous china 10 litres low level cistern with fittings, 15 mm ptmt bib cock, 15 mm ptmt bib stop cock (male thread), white vitreous china clay half stall urinal flat back 580x380x350 mm or angle back 450x375x350 mm with waste fittings as per is: 255, ptmt pillar cock, ptmt -towel ring 215x200x37 mm, aluminium handles 100 mm with plate, ceramic glazed tiles ist quality 300x300 mm in all colours shades and designs except burgundy, bottle green black, chlorinated polyvinyl -chloride (cpvc) pipe 15 mm outer dia, chlorinated polyvinyl -chloride (cpvc) pipe 20 mm outer dia, chlorinated polyvinyl -chloride (cpvc) pipe 25 mm outer dia, supplying of r.c.c. pipes np2 class 250 mm dia, supplying of ptmt -angle stop cock with flange, supplying of black japan paint at mcd store, supplying of synthetic enamel paint in black or choclate shade, supplying of c.p. brass angle valve 15 mm, supplying of ptmt push cock 15 mm dia, supplying of ptmt liquid soap container of 400 ml capacity, supplying of water proofing cement paint

CTN :43323869

26 Dec, 2025 NA

Kupwara - Jammu And Kashmir

Tender For supply of polyethylene pipes for water supply conforming to is 4984 (q3)

Ci Pipe Sale Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors